Gibson

Description

Issues - 1959 Gibson J-200 Natural: A29514. T7431 15. “H1030” stamped into the top of the headstock. The fingerboard has been removed at some point and the truss rod replaced. The truss rod is now anchored through the neck block and is visible from the sound hole. There are extra screw holes above the top truss rod cover screw hole. The extra screw holes have been filled and finished over. The G tuner has a couple extra screw holes around it from a different tuner being on it. The holes are filled and finished over. The skunk stripe appears to have cracked and was reglued. The back has 3 spots with touch up from some sort of holes or divots but they did not go through the wood all the way so they're not visible from inside. The top and back of the neck are likely over sprayed. The nut and saddle are changed. It has a pickup installed. Bridge has been reset and thinned. The bridge has some finish on it. It also had a crack through the peg holes that has been repaired. A few small top cracks that have been repaired and are under the finish. The bridge plate has been covered in silicone and metal shielding. Action is medium. The nut slots are all cut too low and will need to be built back up.

Condition & Details

  • Includes Hardshell Case
  • This product was made in United States

Featured Articles