Description

The Neunaber Immerse Reverberator Mk II stereo reverb guitar effects pedal raises the bar with eight rich stereo reverbs in one easy-to-use unit. No user manual is required. Experience studio-quality tone that can be used with instruments of all stripes.

Connect stereo outputs for a huge, immersive-sounding reverb. Want to change it up and plug into a single amp? Immerse will sum a stereo input to mono with only output 1 connected. Your dry signal remains analog for low noise and zero latency. Use a standard 9V or 12V pedal power supply (sold separately). Or, connect the Immerse Reverberator MkII to a 100mA output on a brick supply.
Neunaber Immerse Reverberator Mk II Stereo Reverb Effects Pedal - Black
Neunaber Immerse Reverberator Mk II Stereo Reverb Effects Pedal - Black
Neunaber Immerse Reverberator Mk II Stereo Reverb Effects Pedal - Black

Features

  • High-quality buffered bypass, perfect for placing at the end of the signal chain
  • Trails switch
  • Kill Dry switch for parallel effect loops
  • Inputs/outputs can be used mono (#1) or stereo (#1 and #2)
  • Analog dry signal for low noise and zero latency
  • Small, pedalboard-friendly footprint
  • Requires standard 9V pedal power supply (sold separately)
  • Designed and manufactured in California

Specs

Electrical
  • Input level: Instrument/consumer line level
  • Input impedance: 1 mohm
  • Frequency response: 20Hz–30kHz
  • Total harmonic distortion: < 0.01%
Power
  • Input: 9–12V DC, 100mA
  • Connector: Center-negative, 5.5 mm OD x 2.1 mm ID
Physical
  • Dimensions: 2.6" x 4.6" x 1.9" (63 mm x 115 mm x 46 mm)
  • Weight: 6.7 oz. (190 g)

Featured Articles

Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.