AKG

Description

The D12 VR is a large-diaphragm cardioid dynamic microphone. Designed specifically for kick-drum recording applications, the microphone has a thin diaphragm to enhance the low-frequency performance. Its predecessors have been an industry standard in kick drum mics for decades. The D12, and subsequently the D12E and the D112, have been the choice of drummers and the live sound engineers who love them since 1950.

Without phantom power, the microphone delivers the pure character of the sound source. With phantom power enabled, one of three switchable active-filter presets can be used to quickly adapt the microphone response to suit the desired kick drum sound. The filter setting can be controlled using a switch on the microphone body. In this mode, the output level is also reduced by 10dB automatically.

Check out the latest version the D12 VR. It has retained the attributes of the original but taken advantage of modern innovations. Vintage and modern have just met up, and they have done so in front of the kick drum head.
AKG D12 VR Large-Diaphragm Cardioid Dynamic Kick Drum Mic
AKG D12 VR Large-Diaphragm Cardioid Dynamic Kick Drum Mic
AKG D12 VR Large-Diaphragm Cardioid Dynamic Kick Drum Mic

Features

  • Four different sound shapes
  • Ultrathin diaphragm
  • Optimized bass chamber
  • Original C414 transformer
  • Cardioid polar pattern
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Specs

  • Type: Dynamic pressure gradient transducer
  • Polar pattern: Cardioid
  • Frequency range: 17Hz–17kHz (±2dB)
  • Sensitivity: 1,2 mV/Pa ± -58dBV (at 1,000Hz passive)
  • Max. SPL: 164dB SPL (for 0,5 % THD)
  • Impedance: <200 ohms (at 1,000Hz)
  • Recommended load impedance: >1,000 ohms
  • Environment temperature range: -10º C - +70º C
  • Relative humidity at +20º C: 90%
  • Connector: Three-pin male standard XLR
  • Finish front grille: Glossy galvanized nickel matte
  • Rear grille: Matte black paint
  • Dimensions: 125 mm x 101 mm x 66 mm (4.9" x 3.9" x 2.6")
  • Net weight: 500 g (1.1 lb.)

Warranty

AKG Acoustics, U.S. Limited Warranty

Amended July 19, 2005

AKG Acoustics warrants AKG products against defects in material or workmanship for a period of two years from the date of original purchase, and agrees to repair or, at our option replace any defective unit without charge for either parts or labor. AKG grants a three-year warranty covering selected products (C 12 VR, C 414 B-ULS, C 414 B-TLII, C 414 B-XLS, C 414 B-XLII, C 426 B, C 451 B, C 480 B, C 391 B, C 1000 B, C 2000 S, C 3000 B, C 4000 B, C 4500 B, SolidTube) against defects in material and workmanship.

Warranty is valid for AKG products purchased and delivered within the United States for the original purchaser only. The purchaser's Bill of Sale will serve as proof of sale and warranty validity in the U.S. Shipment of defective items to AKG for repair will be at the customer's own risk and expense. AKG will assume the return shipping cost for all items repaired under warranty.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts, or connecting the product to any receptacle other than specified.

This warranty is void unless AKG Acoustics, U.S.'s service center performs the repair. No responsibility is assumed for any special, incidental or consequential damages caused by the consumer. However, the limitation of any right or remedy shall not be effective where law prohibits such.

Featured Articles

Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.